True Quality Painting & Siding

My Crew and I will respect your home and your need to live in your home while your exterior is being painted.

True Quality Painting and Siding provides a unique service to it's customers.

 

In Washington we deal with a large number of failed LP or Werhouser siding. This siding can many times be saved or given new life by coating the underside of the siding with a product called Elastomeric. This seals the siding from further damage. Other times the siding has completly failed and needs to be replaced, or partially replaced. If we can save part of the siding by using elastomeric and replace only the failed portions/walls, we can save the customer thousands of dollars.

House Painting Products

We use a combination of superior products by:

• Kelly-Moore
• Benjamin-Moore
• Sherwin Williams

We have found that each brand has strengths depending on the specific application (interior, exterior, oil, latex, etc.) You will not find True Quality using inferior products on your home. Job sites are cleaned daily.

Standard Process

(Each home is different and therefore the process may vary)

Preparation:

1. Bleach solution to kill mildew
2. Pressure wash
3. Scrape or sand as needed
4. Caulk all knots, seams and cracks
5. Mask windows, doors, fixtures etc.

Application:

6. Prime (as needed)
7. Paint and back-roll* body of home
8. Paint trim
9. Spray front door and garage doors.
10. Clean-up
11. Touch-up
12. Walk through with homeowner

*Back-rolling is the key to a quality paint job. Watch out for a painter who doesn’t back-roll! Even James Hardie of Hardie Plank recommends his product be back-rolled! Working the paint into the siding after spraying is a must. Not back-rolling will cause the paint to peal, blister and eventually damage your siding in a matter of only a few years. The consequence of this is very expensive.